+86-13906655178
Home / News / Product News / How To Install A Smart Switch? DIY Guide

How To Install A Smart Switch? DIY Guide

Views: 26     Author: Site Editor     Publish Time: 2025-03-25      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

With the popularity of smart homes, smart switches have gradually become a must-have device for modern families. Not only can they be remotely controlled via mobile phones, but they can also be linked with voice assistants to improve the convenience of home life. So, how to install a smart switch? This guide will give you a detailed introduction to the steps and precautions for DIY installation.

Preparation before installation

Before installing a smart switch, be sure to make the following preparations:

Confirm that the power is off

Before installing a smart switch, be sure to turn off the corresponding circuit breaker in your home to ensure safe operation.

Check whether the tools are complete

Screwdriver

Wire stripper

Electronic pen

Smart switch equipment and accessories

Understand the wiring requirements of smart switches

Most smart switches require neutral and live wires. If your original switch only has a live wire, you may need to add a neutral wire or change the model.

Steps to install a smart switch

Follow the steps below to easily complete the DIY installation of a smart switch:

Remove the old switch

Use a screwdriver to remove the panel of the old switch to expose the wiring terminals.

Wiring operation

According to the wiring diagram of the smart switch, connect the live wire, neutral wire, and ground wire to the corresponding wiring terminals respectively.

Use wire strippers to handle the bare wires, ensuring good contact and tightening.

Smart Switch 02

Fix the smart switch

Reinstall the terminal block into the junction box and fix the switch panel with screws.

Power-on test

Turn on the circuit breaker to test whether the smart switch is operating normally.

Network configuration of smart switch

Download the official APP

Scan the QR code on the instruction manual to download the official APP of the smart switch brand.

Connect to Wi-Fi

Open the APP and follow the prompts to connect to the Wi-Fi network (2.4GHz frequency band is recommended).

Add and name the device

After successful network configuration, you can name and set functions for the smart switch in the APP, such as timer switch, remote control, etc.

Installation precautions

Make sure the power is off: The entire installation process must ensure that the power is off to prevent the risk of electric shock.

Check the correctness of the wiring: The live wire, neutral wire and ground wire must not be connected incorrectly, otherwise the device may not operate or be damaged.

Use qualified products: It is recommended to purchase wholesale from regular smart switch suppliers to ensure quality and after-sales guarantee.

Advantages and selection of smart switches

After installing the smart switch, you will experience convenient smart home control, such as remote operation, voice control, timer switch, etc. If you are looking for a reliable wholesale channel, welcome to contact CNBW smart switch supplier, we provide a variety of models and quality services.

Wholesale contact email: zjbowong_sale@163.com

Official website: https://www.zjcnbw.com

Table of Content list

GET IN TOUCH

Add: Building 9,No.1156 Binhai 1st Road, Xinghai StreetWenzhou Economic and Technological DevelopmentZone,Wenzhou City,Zheiiang Province
Tel: +86-13906655178
WeChat: +86-13906655178

QUICK LINKS

PRODUCT LINKS

SUBSCRIBE

Promotions, new products and sales. Directly to your inbox.
Subscribe
Copyright © 2024 Zhejiang Bowang Intelligent Technology Co., Ltd.